We’ve acquired a number of in-person occasions to inform you about in in the present day’s roundup, as SMASIS, IMTS, and extra will probably be held this week. Webinars will give attention to subjects together with post-processing, utilizing additive manufacturing to enhance the availability chain, biomaterials, and extra. Learn on for all the main points!
September 12 & 14: The Expertise Stratasys Tour Continues
The Expertise Stratasys Tour continues this week, stopping first on the Lane Motor Museum in Nashville, Tennessee, with host TriMech, on Monday, September twelfth. On Wednesday the 14th, the tour heads to St. Louis, Missouri, the place CATI will host at Topgolf.
“Our cell showroom presents a neighborhood, handy approach so that you can discuss with 3D printing specialists and see the newest 3D printers, supplies and options from Stratasys. Find out about additive manufacturing companies from Stratasys Direct and uncover how your group can profit from 3D printing purposes.”
You possibly can register for the Stratasys Expertise Tour right here. Keep tuned for extra dates and places sooner or later!
September 12 – 14: ASME’s SMASIS 2022 Convention
From the twelfth to the 14th, ASME will probably be holding SMASIS 2022, its premier convention on Sensible Supplies, Adaptive Buildings, and Clever Techniques, in Dearborn, Michigan. Attendees are invited to share their good supplies analysis, facilitate product development, enhance their data in specialised subject areas corresponding to biomedical engineering, robotics, and supplies improvement, and community with different researchers from universities, firms, and authorities labs to search out their subsequent R&D companion or employer. A particular job truthful can even be held throughout the convention, in addition to the Pioneer Awards Banquet.
“ASME’s SMASIS convention brings collectively the worldwide good supplies, adaptive buildings, and clever techniques neighborhood to debate technical developments which might be bridging the hole between science fiction and real-world engineering. This system is designed to not solely showcase the newest analysis but additionally encourage significant dialogue in a snug setting amongst attendees from academia, trade, and authorities.”
You possibly can register for SMASIS 2022 right here.
September 12 – 16: 3D Printing Information Unpeeled
Our Government Editor Joris Peels, who’s additionally the Vice President of Consulting at SmarTech Evaluation, launched a day by day information livestream referred to as 3D Printing Information Unpeeled. Every weekday at 9:30 am EST, Peels will get on LinkedIn Reside and tells us, in 20 minutes or much less, what he considers to be the high information tales from the 3D printing trade that day, and why they’re vital. Among the tales in his roundup are ones we’ve lined at 3DPrint.com, and a few should not, however they’re all equally attention-grabbing and impactful.
The subsequent 3D Printing Information Unpeeled livestream will probably be this Monday, September twelfth, at 9:30 am EST, and can proceed the remainder of the week on the similar time. You don’t wish to miss it!
September 12 – 17: IMTS 2022
For the primary time since 2018, the Worldwide Manufacturing Expertise Present (IMTS) is returning to Chicago! That is the most important and longest-running trade commerce present within the Western Hemisphere, and is held each two years at McCormick Place. Business professionals from all around the globe attend to expertise greater than 15,000 new machining applied sciences, uncover the newest digital and conventional manufacturing improvements, and study the most effective methods to resolve their very own manufacturing challenges. The present options over 2,000 cubicles throughout 9 pavilions, in addition to AM4U by Formnext, an Investor Discussion board, workshops and job outlets, the Ladies Make Manufacturing Transfer specialty program, and rather more. A number of members of the 3DPrint.com staff can even be attending IMTS 2022—search for us within the Additive Manufacturing Pavilion, West Constructing, Degree 3!
“IMTS 2022, which is able to run September 12-17, 2022, is the place the creators, the builders, the sellers, and the drivers of producing know-how come to attach and be impressed.”
You possibly can register for IMTS 2022 right here.
September 13 & 14: Automating Put up-Processing for Mission-Vital Elements
This Tuesday and Wednesday, the thirteenth and 14th, PostProcess Applied sciences is holding a sequence of webinars on “Tips on how to Get Mission Vital Elements into the Palms of Warfighters Sooner with Automated 3D Put up-Processing.” The corporate’s East Coast Enterprise Improvement Supervisor, Jon Strible, will probably be presenting throughout three reside broadcasts from the PostProcess lab, throughout which attendees can get a close-up have a look at how {hardware}, software program, and chemistry mix to realize automated, transformative finish half outcomes. You’ll have the ability to see options operating reside on the corporate’s proprietary AUTOMAT3D software program platform, and interact in real-time Q&A as effectively. Every webinar will give attention to a unique assist removing course of, with the ten am EST one on Tuesday about resin removing, the ten am EST one on Wednesday about FDM assist removing, and the 11:30 am EST one on Wednesday about PolyJet assist removing.
“Are you trying to get completed 3D printed components to the entrance traces sooner? See how automating the ultimate step of the 3D printing course of, post-processing, ensures excessive half high quality, decrease lead occasions, and heightened repeatability/consistency for army purposes. In the end, getting mission-critical components into the fingers of Warfighters sooner and enhancing mission readiness.”
You’ll find registrations signups for the three webinars right here.
September 13 – 16: Cast Tour Half Deux
Markforged continues its world Cast Tour Half Deux tour, that includes the Digital Forge, pints, and snacks, within the EMEA and APAC areas this week. First, on the thirteenth, the tour heads to the Auto Cluster Improvement and Analysis Institute in Pune, Maharashtra, India with the Adroitec staff at 11 am IST, after which to Parramatta Rydges in Rosehill, NSW, Australia with SFDesign at 12 pm AEST the identical day. Additionally on the thirteenth, Markforged and gerenga (Thailand) Co., Ltd. head to Huai Khwang, Bangkok at 3 pm Indochina/Thailand time, and the corporate can even go to Mark3D in Haiger, Germany at 9:30 am CEST on the thirteenth. The tour stays within the EMEA on the 14th, visiting 3DInfinity with GS Expertise in Maldegem, Belgium at 9:30 am CEST, after which heads to Innova Techniques in Bromsgrove, UK at 10 am BST on the fifteenth. There can even be stops on the fifteenth at 3DZ in Madrid, Spain at 10:30 CEST and the Konica Minolta Showroom in Auckland, New Zealand at 8 am NZST. Lastly, on the sixteenth, Markforged heads to the Chemtron Showroom in Singapore at 10 am SST, and to Nuovamacut Automazione Spa in Bologna, Italy at 9:30 am CEST.
“We invite you to satisfy the platform that prints industrial components on the velocity of software program in individual. The Digital Forge is a mix of software program, supplies, and printers that deliver you robust and dependable options to your manufacturing ache factors.”
Keep tuned for extra dates and places sooner or later!
September 13: 3D Printing Funding Casting Patterns
3D Techniques is holding a webinar on “The Benefits of 3D Printed Funding Casting Patterns with QuickCast” at 5 am EST on Tuesday, September thirteenth. Should you’d like to avoid wasting time, materials, and cash whenever you’re 3D printing patterns for funding casting, Evan Kuester, Principal Superior Purposes Engineer for 3D Techniques, will clarify how you should use Quickcast to take action. This answer can be utilized to provide high-quality, sturdy patterns with complicated patterns in hours, along with giant, light-weight, shippable ones as effectively.
“Find out about how 3D-printed funding casting patterns manufactured by way of the Quickcast® workflow may help your foundry or service bureau develop its buyer base. Evan Kuester will clarify what QuickCast is and the way its hollow-part casting strategy lowers prices and will increase velocity in manufacturing.”
You possibly can register for the webinar right here.
September 13: AM Materials Characterization Seminar
Additionally on the thirteenth, at 6 am EST (10 am GMT), Malvern Panalytical is holding a free on-line seminar about “Materials Characterization Additive Manufacturing.” 12 audio system from universities and trade will current on associated subjects, corresponding to how materials characterization helps the sustainability agenda for metallic AM; used metallic powder renewal and characterization in AM; understanding polymer powder ageing by way of rheology and GPC; course of optimization of dual-curing resins in AM utilizing thermal evaluation, and lots of extra.
“Specializing in the necessities and strategies used to characterise and qualify supplies (and components) for additive manufacturing – polymers, composites, and metals. Netzsch and Malvern Panalytical can even be giving a sensible introduction to their key characterisation instruments for additive manufacturing, together with Thermal Evaluation, Particle Characterisation and X-ray evaluation.”
You possibly can register for the free seminar right here.
September 13: Utilizing AM to Enhance Provide Chain Resiliency
At 2 pm EST on Tuesday, September thirteenth, the Additive Manufacturing Coalition and the US Home of Representatives Manufacturing Caucus will current a joint Zoom discussion board on “How AM Can Enhance Provide Chain Resiliency.” Senator Gary Peters and Congressman Tim Ryan have been invited to current opening remarks, and the opposite audio system will probably be Tali Rosman, VP and Basic Supervisor of Xerox Elem Additive; James DeMuth, CEO of Seurat; and a consultant from America Makes.
“The AM Coalition and the Home Manufacturing Caucus (U.S Congress) are partnering to current an informative session on how additive manufacturing may considerably enhance the nation’s provide chain resiliency. Come learn how.”
You possibly can RSVP for the reside discussion board right here.
September 15: Velo3D’s Seeing is Believing Tour
This spring, Velo3D (NYSE: VLD) introduced its Seeing is Believing Additive Manufacturing Tour for Europe, which has visited a number of cities in France, the UK, Germany, and Italy. This Thursday the fifteenth, the tour heads to Toulouse, France at 12 pm CET, with arrivals, networking, and lunch at La Brasserie du Stade, adopted by a Velo3D presentation in Stade Toulousain, Salon 1 at 2 pm CET. Attendees will get an outline of the corporate’s end-to-end answer, together with its Stream Print Preparation Software program, Sapphire 3D printers, Guarantee High quality Management Resolution, and the underlying Clever Fusion manufacturing course of. Actual-world examples of 3D printed components for purchasers can even be on show, and attendees may also have interaction with Velo3D staff one-on-one and have their questions answered.
“Whether or not you’re new to metallic additive manufacturing (AM) or have some expertise with standard AM applied sciences, our upcoming “Seeing is Believing” roadshow in Toulouse, France is the proper alternative to find out how Velo3D’s end-to-end answer is pushing the boundaries of what AM can obtain.
“Come and uncover how Velo3D may help unlock seemingly not possible designs, obtain higher half efficiency, and assist present higher half repeatability and provide chain flexibility.”
You possibly can register for the roadshow in Toulouse right here.
September 15: 3DHEALS on Biomaterials on 3D Printing
Lastly, 3DHEALS will maintain a webinar at 11 am EST on the fifteenth about “Biomaterials for 3D Printing.” Dr. Jenny Chen, the founder and CEO of 3DHEALS, will probably be moderating the webinar, and the audio system will probably be Guillaume de Calan, founder and CEO of Nanoe; Rao S. Bezwada, PhD, President and CEO of Bezwada Biomedical, LLC; Caroline Lauret, MSc, World Director Gross sales & Strategic Advertising at Evonik; Dr. Thiago Borges, Supervisor – Buyer Initiatives at Evonik’s biomaterials heart; and Ben Hartkopp, CPO and Co-Founder, Quantica. There will probably be a chance for digital networking on Zoom after the webinar.
“Biomaterial science is without doubt one of the main pillars of the profitable development of 3D printed options for healthcare. On this webinar, we invited stakeholders from academia, trade, bigger chemical and materials firms, and rising startups to provide you a complete view of the place materials science know-how for healthcare 3D printing is at. We purpose to offer data with sufficient breadth and depth that’s appropriate for each most people and trade specialists.”
You possibly can register for the webinar right here.
Do you’ve got information to share about any future webinars or digital and reside occasions? Please tell us!
Subscribe to Our E mail E-newsletter
Keep up-to-date on all the newest information from the 3D printing trade and recieve data and presents from thrid get together distributors.
