Shenzhen-based 3D printer producer TwoTrees was established 5 years in the past, they usually have a brand new pocket-friendly CoreXY FDM 3D printer out. They’ve additionally simply launched a low-cost laser engraver, they usually need you to know all about it.
TwoTrees SP-5 CoreXY 3D Printer
To whet your appetites, let’s begin with a specs desk of the brand new Two Timber SP-5 CoreXY printer with 300mm x 300mm x 330mm construct quantity and twin z-axis.
|Construct quantity||300mm x 300mm x 330mm|
|Print mattress||Heated (as much as 100°C)|
|Extruder||Twin Direct Drive (as much as 260°C)|
|Show||3.5″ coloration contact display|
The CoreXY construction affords improved velocity and accuracy because of its decreased mass in comparison with gantry-type printers.
The SP-5 comes with a linear rail system for all three axes, X, Y and Z .
Along with linear rails on all axes, the Z-axis options twin stepper motors hooked up to the full-metal body. The extrusion methods is powered by a silent drive – for ultra-quite printing.
Functionally, the printer comes with resume printing perform, filament sensor, dual-gear BMG extruder and a 3.5 inch contact display.
This all quantities to a printing accuracy of 0.1mm at print speeds of as much as 200mm/s.
The worth for this bundle of CoreXY goodness? A really affordable $479 USD.
You possibly can learn full particulars of the SP-5 CoreXY printer over on the product webpage right here.
Now onto the laser cutter. In truth, Two Timber has an entire bunch of them to go well with all wants, however let’s take a look at the TS2 mannequin.
That’s the Two Timber TS2 laser cutter/engraver under.
The TS2 laser cutter options 10W output and a sensible auto-focus laser for slicing by way of lighter supplies and engraving tougher supplies with ease. Instance given: it will possibly reduce by way of 8mm thick plywood as if it was nothing.
This specific laser system has a reasonably hefty work space of 450mm x 450mm to allow engraving and slicing of bigger items. Moreover, it comes with a flame detector perform.
Like most laser engraving/slicing methods the TS2 helps LaserGRBL, and LightBurn software program.
The TS2 is offered now for $699.
You possibly can learn extra in regards to the TS2, and different laser engravers from TwoTrees over at this hyperlink. The TS2 is the one of many bigger of their laser cutter choices they usually are available in a wide range of sizes for a spread of wants.
The TS3 for instance comes with its personal enclosure, exhaust pipe & an optionally available smoke filter for these involved about fumes generated whereas slicing. It additionally comes with a compressed laser spot, 10W highly effective laser from double 5W, built-in flame detector & fireplace alarm, built-in honeycomb workbench, cylindrical engraving characteristic and management/operation with WIFI and cellular APP.
That retails for $869, and it appears fairly candy with its good-looking blue enclosure.
You possibly can try their on-line store in full through the hyperlink under.